Name: TRAK TRL 3060RX Toolroom Lathe
Brand: TRAK Machine Tools
SKU: TRAK-3060RX
Availability: LimitedAvailability

Specifications All Machines

	1630RX	1630HS-RX	1845RX	2470RX	3060RX	30120RX
Capacity
Height of Centers	8″	8″	9″	12″	16.5″	16.5″
Distance between centers	30″	30″	45″	70″	60″	118″
Swing over bed	16″	16″	18.1″	24″	33″	33″
Swing Over Saddle Wings	16″	16″	17″	24″	33″	33″
Length of Gap	N/A	N/A	N/A	N/A	15.5″	15.5″
Swing Over Gap	N/A	N/A	N/A	N/A	43.5″	43.5″
Swing Over Cross Slide	8.6″	8.6″	9.13″	14.5″	21.2″	21.2″
Maximum Turning Length (Z Axis Travel)	N/A	N/A	N/A	N/A	60″	121″
Cross Slide Travel	8.5″	8.5″	10.6″	12.5″	20.5″	20.5″
Tool Section Max	3/4″	3/4″	1″	1″	1.5″	1.5″
Coolant Reservoir Capacity	8 gal	8 gal	13 gal	15 gal	35.6 gal	48 gal
Oil Pump - Way Lubrication	N/A	2 litros	2 litros	2 litros	2 litros	2 litros
Head Stock Lubrication - Type	1.5 gal	1.5 gal	1.85 gal	5.3 gal 6.3 gal w/oil cooler option	N/A	8.5 gal
Rapid Speeds	400 IPM on Z Axis 200 IPM on X Axis	400 IPM on Z Axis 200 IPM on X Axis	400 IPM on Z Axis 200 IPM on X Axis	400 IPM on Z Axis 200 IPM on X Axis	400 IPM on Z Axis 200 IPM on X Axis	400 IPM on Z Axis 200 IPM on X Axis
Bed
Width Of Bed	12.6″	12.6″	13.4″	14.57″	18″	19.69″
Height Of Bed	12.6″	12.6″	12.4″	15″	15.75″	18.7″
Headstock
Spindle Nose	D1-6	A2-4	D1-6	D1-8	A2-11	A2-11
Spindle Through Hole	2.12″	1.57″	2.36″	4.09″	6.30″	6.30″
Spindle Taper	MT#6	MT#5	MT#6	MT#8	Non MT taper	Non MT taper
Taper In Reduction Sleeve	N/A	N/A	MT#4	MT#5	MT#5	MT#5
Spindle Dia At Front Bearing	3.15″	2.56″	3.35″	5.51″	7.87″	7.87″
Number Of Bearings	2	5	2	2	2	2
Number of Speeds or Ranges	1	1	2	2	2	2
Spindle Speed Range RPM	150 - 2,500	150 - 4,000	80 - 850, 250 - 2,500	40 - 670, 100 - 1,800	20 - 415, 40 - 1,300	20 - 415, 40 - 1,300
Spindle ID Thread (end of spindle)	M56 x 2MM Pitch	M56 x 2MM Pitch	N/A	N/A	N/A	N/A
Tailstock
Quill Travel	5.75″	5.75″	6″	8.5″	8″	8″
Quill Diameter	2.36″	2.36″	2.56″	3.5″	4.13″	4.13″
Quill Taper Hole	MT#4	MT#4	MT#4	MT#5	MT#6	MT#6
Spindle Motor
Horsepower	7.5 HP	7.5 HP	10 HP	15 HP	30 HP	30 HP
Power Requirements - Machine
Voltage	200V to 240V	200V to 240V	200V to 240V	200V to 240V	480V +/- 10% (432V to 528V)	480V +/- 10% (432V to 528V)
Amps Full Load Current	44A	44A	54A	73A	62A	62A
Phase/Hz	3/60	3/60	3/60	3/60	3/60	3/60
Dimensions
Net (L x W x H), lbs.	82″ x 45″ x 72″ 2,750 lbs	82″ x 45″ x 72″ 2,750 lbs	88″ x 55″ x 70″ 3,285 lbs	129″ x 84″ x 79″ 6,500 lbs	150.31″ x 86.61″ x 88.25″ 13,970 lbs	212.6″ x 86.61″ x 88.25″ 18,920 lbs
Shipping (L x W x H), lbs.	87″ x 45″ x 70″ 3,420 lbs	87″ x 45″ x 70″ 3,500 lbs	91″ x 52″ x 79″ 3,800 lbs	134″ x 65″ x 79″ 7,500 lbs	162″ x 90.55″ x 96.25″ 17,500 lbs	222.44″ x 90.55″ x 96.25″ 21,000 lbs
Other
Coolant Pump Motor HP*	1/8 HP	1/8 HP	1/8 HP	1/8 HP	1/4 HP	1/4 HP
Spindle Motor Brake	Dynamic	Dynamic	Dynamic	Dynamic	Dynamic	Dynamic
Way Surface Hardness	400-450 HB	400-450 HB	480-560 HB	480-560 HB	480-560 HB	480-560 HB
Head Stock Lubrication - Type	Oil Bath	Grease	Oil Bath	Oil Bath	Oil Bath	Oil Bath
Options
Tooling Kit	3/4″	3/4″	3/4″ or 1″	1″	1-1/4″	1-1/4″
Chuck	8″, D1-6	6″, A2-4	8″, D1-6	12″, D1-8	20″, A2-11	20″, A2-11
5C Collet Closer	D1-6	A2-4	D1-6	N/A	N/A	N/A
Turret Option	3/4″, 8 Position 3/4″, 4 Position	3/4″, 8 Position 3/4″, 4 Position	3/4″ or 1″, 8 Position 3/4″ or 1″, 4 Position	1″, 8 Position 1″, 4 Position	1″, 8 Position	1″, 8 Position

* Coolant pumps are optional equipment.

Options

Machine Options

Buck^® Chuck

Direct mounting, featuring separate top jaws and master jaws. Chucks offered for each model are rated from the maximum RPM of the lathe.

Lathe	Chuck	Through Hole
1630RX	8″ / D1-6	2.36″
1630HS-RX	6″ / A2-4	1.77″
1845RX	8″ / D1-6	2.36″
2470RX	12″ / D1-8	4.16″
3060RX	20″ / A2-11	7.48″
30120RX	20″ / A2-11	7.48″

Rear Chuck & Adapter

Optional 16″ rear chuck and chuck adapter for the 3060RX and 30120RX. Both front and rear chucks are balanced at the factory when purchased with the machine. Chucks purchased separately may need to be balanced.

For the TRL 3060RX and TRL 30120RX.

Option	Description
Rear chuck & adapter	16″ chuck
Adapter - rear chuck	Adds A2-11 spindle nose

8 Station Turret

The 8-station turret for TRAK Long Travel Lathes uses 1″ tooling and supplies coolant at each tool. Clamping is accomplished through hydraulics.

Lathe	Tooling
3060RX	1″
30120RX	1″

VIDEO: 8-Station Turret for TRAK^® Long Travel Lathes

Tooling Kit

Dorian^® brand tooling kits make tool changes quick and easy. Repeatable to .001″. The 1‑1/4″ tooling kit for the 3060RX and 30120RX includes:

(1 ) Quick change tool post
(4) Square tool holders for turning, facing and boring
(1) Boring tool holder (1.50″)
(1) Morse taper holder (MT5)
(1) T-slot nut

Chip Conveyor

TRAK offers a hinged belt-style chip conveyor for the TRL 3060RX. The conveyor receives power directly from the lathe and is controlled by the operator with a switch on the pendant.

Faceplate

Lathe	Diameter
1630RX	14″
1630HS-RX	14″
1845RX	14″
2470RX	20″
3060RX	30″
30120RX	30″

Follow Rest

Lathe	Diameter	Type
1630RX	5″	Solid Brass Nib
1630HS-RX	5″	Solid Brass Nib
1845RX	3.94″	Solid Brass Nib
2470RX	6.5″	Solid Brass Nib
3060RX	0.79 - 7.87″	Solid Brass Nib
30120RX	0.79 - 7.87″	Solid Brass Nib

Steady Rest

Lathe	Diameter	Type
3060RX	1.18 to 11.02″ 10.43 to 21.65″	Roller
30120RX	1.18 to 11.02″ 10.43 to 21.65″	Roller

Comes with 2 sets of fingers.

Remote Stop/Go Switch for Enhanced Safety

A hand-held switch to stop and continue program run.

TRAK^® USB Memory

The USB Memory option consists of an industrial-grade Delkin^® Thumb drive. This device is unsurpassed for reliability and speed of file access and is the storage of choice for our own software engineers.

VIDEO: Seamlessly Store Programs with TRAK^® USB Memory

Extended Warranty

TRAK offers a 2 year extended warranty for this product.

Software Options

TRAKing^® for RX Lathes

TRAKing of programs during program run, GO TO Dimension in DRO Mode.

VIDEO: TRAKing^® Option Overview

CAM File Out Converter

Write, save and then run programs with RX Canned Cycle Events on Legacy ProtoTRAK controls in either .CAM Events or .GCD format.

Auxiliary Output

Programmable output signal.

Offline Programming - ProtoTRAK RX

ProtoTRAK RX user interface for Windows^® PC
Program parts and simulate CNC Run
Modify files from current and former ProtoTRAK models

VIDEO: Learn to Install ProtoTRAK Offline Software

DXF Converter

Import and convert CAD data into ProtoTRAK programs
DXF or DWG files
Chaining
Automatic Gap Closing
Layer control
Part alignment
Feature analysis (circle/arc radius and position)
Simple CAD construction/editing tools
DXF-output capability
Easy, prompted process you can do right at the machine

Advanced Features

Verify Make Part – solid model graphics of programmed toolpath
Event Comments
G-code editor
Thread Repair
Clipboard
Gang Tool setup
Custom Thread event
Tap event
Search Edit

MTConnect^®

The TRAK MTConnect option enables customers to add MTConnect functionality quickly and easily to their machines, so that machine data can be collected using the standard MTConnect protocol.

Machine networking through ethernet connection or USB Wi-Fi adapter
Collect machine data throughout shop
Monitor machine status, receive notifications and analyze data throughout your machines’ history

3^rd party software not included.

VIDEO: MTConnect^® Option Overview

Videos

TRAK RX Series Toolroom Lathes Overview featuring the TRL 1845RX

TRAK TRL 1630RX Lathe featuring the ProtoTRAK RLX

TRAK TRL 30120RX Lathe Overview

8-Station Turret for TRAK Long Travel Lathes

Introducing the TRL 30120RX Gap Bed Lathe | ProtoTRAK RLX

How-To Videos

See video tutorials related to the ProtoTRAK RLX CNC.

TRAK TRL 3060RX Toolroom Lathe Large capacity, rigidity and the versatility of the ProtoTRAK RLX CNC

Specifications

Standard Features

Specifications All Machines

Capacity

Bed

Headstock

Tailstock

Spindle Motor

Power Requirements - Machine

Dimensions

Other

Options

Options